Donaldson Torit TDS & Camfil Farr GS cartridge filters

Both the Donaldson TDS and GS Camfil Farr reverse jet cartridge filter plants are robustly constructed from 3mm mild steel plate fully welded, designed to operate in heavy or light duty applications.

Filter cartridges are vertically located within the filter cell. Compressed air is fed from a blow tube and compressed air tank located on the clean side of the filter, directly down each cartridge offering an efficient  method of removing the dust cake built up on the filter media surface.

Various cartridge media types can be applied from Ultraweb, Spun Bonded Polyester to Hemi-Pleat elements with dust carry over levels as low as 1mg/m3 being achievable.

Dust which has either been separated by the pre-settlement chamber or from the filter bag cell following pulse cleaning is channelled via a hopper section with support steelwork to single or multiple flanged outlets.

Various discharge valves can be applied to basic collection bins with bin liner option, manual wafer bagging of valve, double weighted counter balance valve, rotary valves and screw conveyors.

Key Features:

  • Heavy duty welded construction
  • Filter sizes range from 30M2 to 3900M2 areas
  • Various filter media: UltraWeb, Spun Bonded Polyester, Hemipleat, Tetratex
  • Compressed air cleaning 24 hour per day operation
  • Pulse on demand air saver technology
  • Clean side accessible filter removal
  • Integral and floor mounted fanset options
  • Acoustic diffuser silencer options
  • Indoor/outdoor location
  • Multiple hopper alternatives and support steelwork
  • Starter controllers
  • Energy saving Inverter controls
  • Stainless Steel construction for food & chemical industry
  • ATEX Explosion vents ST1, ST2 & ST3 explosibility rating
  • After filtration and HEPA back up systems
  • Screw conveyors
  • Rotary valves, butterfly wafer manual valves, collection bins with bin liner options
  • British Standard ladders, handrail and platforms